No matter x-ray tube or Computed Tomography tube, appropriate cleaning is very important for using it better and extending service life. Because they are located in high temperature environment for a long time. Appropriate cleaning tube parts can decrease many faults production. Then what kind of tube parts should clean?

First, You should wipe frame and heat exchanger with wet cloth and use water wash fan and let it dry naturally.

Second, Use deionized water wash casing pipe(it contains cover, bolts, insulation Jane set, tubing); You had better use ultrasonic cleaning agents clean and use 80℃ high temperature dry 24 hours

Third, if the surface paint fall off and use electronic toning to spray paint. After the paint drying, you can use water clean

Fourth, Use anhydrous alcohol to wash tube core and skins and use 80℃ high temperature dry 24 hours

Fifth, You can survey and map drawings and use ptfe material replace cathode fixed feame of tube core, joint, insulation board and insulating tube sets material because of they are aging.

本文由廣州佳譽(yù)醫(yī)療器械有限公司編輯